Top

Online Payment | Service Map | About Us | Contact Us

Fibernet Makes Concrete Better

CONCRETE REINFORCEMENT FIBER

Material Safety Data Sheet

Product Name: FIBERNET Fibers Fibrillated and Monofilament Polypropylene fibers.

Composition: Polypropylene, CAS # 9003-07-0, 100%


Hazards Identification

Emergency Overview: This product has been evaluated and does not require any hazard warning on the label under OSHA criteria.


Potential Health Effects

Eye Contact: No significant health hazards identified. Particles or fibers may cause slight discomfort similar to getting dust in the eye.

Skin Contact: No significant health hazards identified. Particles or fibers may cause slight discomfort similar to getting dust in the eye.

Inhalation: No significant irritation expected other than possible mechanical irritation.

Ingestion: No significant health hazards identified.

HMIS Code: (Health:0), (Flammability:0) (Reactivity:0)

NFPA Code: (Health:0), (Flammability:0) (Reactivity:0)


First Aid Measures

Eye: Flush with water. Get medical attention if irritation persists.

Skin: Wash exposed skin with soap and water. Get medical attention if irritation persists.

Inhalation: If adverse effects occur, remove to uncontaminated area.

Ingestion: If a large amount is swallowed, get medical attention.


Fire Fighting Measures

Flashpoint: 430 F,(221 C), ASTM D92

UEL: Not determined.

LEL: Not determined.

Autoignition Temperature: Not determined.

Flammability Classification: None

Extinguishing Media: Agents approved for Class A hazards. Example: halogenated agents, foam, steam, or water fog.

Unusual Fire and Explosion Hazards: None identified.

Fire-Fighting Equipment: Firefighters should wear full bunker gear, including a positive pressure self contained breathing apparatus.
Hazardous Combustion Products: Incomplete burning can produce carbon monoxide and/or carbon dioxide and other harmful products.

Accidental Release Measures: Contain and remove by mechanical means.


Handling and Storage

Handling: No special requirements.

Storage: No special requirements.


Exposure Controls / Personal Protection

Eye: None required. Use of eye protection is good industrial practice.

Skin: None required. Use of protective gloves / clothing is good industrial practice.

Inhalation: None required. Use of adequate ventilation is good industrial practice.

Engineering Controls: Control airborne concentrations below the exposure guidelines.


Exposure Guidelines

Component CAS # Exposure Limits
Polypropylene 9003-07-00 OSHA Total Dust: 15mg/cu meter
OSHA Respirable Dust: 5mg / cu meter
ACGIH, Inhalable Particulate: 10mg / cu meter
ACGIH, Respirable Particulate: 3mg / cu meter

Chemical and Physical Properties

Appearance and Odor: Colorless and odorless.

pH: Not determined

Vapor Pressure: Not determined

Boiling Point: Not determined.

Melting Point: 320 F, (160 C)

Solubility in Water: Negligible, Below 0.1%

Specific Gravity: (Water = 1.0) .91


Stability and Reactivity

Stability: Stable

Conditions to Avoid: None identified.

Materials to Avoid: None identified.

Hazardous Decompositon: Incomplete burning can produce carbon monoxide and/or carbon dioxide and other harmful products.


Toxocological Information

Acute Toxicity Data: Testing not conducted: (Eye Irritation, Skin Irritation, Dermal LD50, Inhalation LC50) See Other Toxicity Data.

Other Toxicity Data: Specific toxicity tests have not been conducted on this product. Our hazard evaluation is based on information from similar products, the ingredients, technical literature, and/or professional experience.

Ecological Information: Ecological testing has not been conducted on this product.

Disposal Information: Enclosed-controlled incineration is recommended unless directed otherwise by applicable ordinances.


Transportation Information

U.S. DOT Not regulated.

Sea (IMO/IMDG) - Not regulated.

Air (ICAO/IATA) - Not determined.

European Road/Rail Not determined.

Canadian Transportation of Dangerous Goods Not determined.



Fiber vs. Welded Wire Fabric

Bottom